Cycle Stop Valves
Constant Pressure Pump Control Valves
Home Products Videos CSV Forum Order Online  


Well and Pump Basic Info
VFD Does Not Save Energy
CSV vs VFD
CSV Tech. Info
CSV Applications
Calculators
Tank Sizing
Pump & Motor Manufacturers
Letters to Editor
References
Retrofits
Pressure Switch
Print Material
Event Calendar
Warranty Info
About Us


Dear Bob,

Well... I've had my system installed now for almost 2 months and would like to share the experience with the forum. So here goes...

First, Bob was extremely helpful in many different ways. In addition to all the sound advice, he pre-assembled and pressure tested the system before shipping it to me. The system arrived quickly and was straight forward to install. Within a few hours I had the old system removed and the new one hooked up. At my request, Bob had pre-set the CSV to 65psi and I fine tuned the pump cut-in/cut-off to 55/75.

The system is working perfectly and the constant 65 psi water is AWESOME!!! The pump come on AND stays on until the water usage stops and the pressure tank refills. No more short cycling! I highly recommend the CSV1Z!

The last test will be to see what happens with the electricity bill. I'm hoping that the continuous running of the larger pump will use less electricity than the horrible short cycling that was occuring with the older and smaller pump. Time will tell...

Thanks again to Bob. I highly recommend his advice and service to all!!!!

Regards,

-- John

Cycle Stop Valves® is a registered trademark.
All right reserved unless prior authorization is obtained. Cycle Stop Valves are patented: Patent number 5,988,984 and other patents pending.
Cycle Stop Valves, Inc.
10221 CR 6900
Lubbock, Texas 79407
Send Email
800-652-0207
806-885-4445
Fax: 806-885-1994
Spatter's Web Design Services - www.spattersweb.net