Cycle Stop Valves
Constant Pressure Pump Control Valves
Home Products Animations Forum FAQ Order Online  


Reviews
CSV Applications
Product Catalog
Print Literature
Well and Pump Basic Info
VFD Does Not Save Energy
CSV vs VFD
CSV Tech. Info
WQA Certified
Calculators
Tank Sizing
Pump & Motor Manufacturers
Letters to Editor
Retrofits
Pressure Switch
Event Calendar
Warranty Info
About Us
Cycle Sensor: Specifications

Features:
  • Digital readout of current and set points
  • More accurate than standard pump protection
  • Set points are stored on power loss
  • Adjustable rapid cycle set point
  • Manual reset on rapid cycle
  • Adjustable dry run set point
  • Adjustable restart delay on Dry Run
  • Optional lock protection feature
  • Compact size


Model CS1PH1-2HP
Input voltage190-264 vac (230V)
Frequency50- to 60 hz
Output rating1/3 to 2HP at 240 vac
Horse power ranges1/3 to 2HP
Dry run adj range1.0 to 15.0 amps
Dry run trip delay10 seconds
Restart delay range1-300 min; 0 for manual reset
Rapid cycle adj range0 to 600 seconds
Ambient operating temp-4 to 122 degrees F
Dimensions4.524 X 3.524 X 1.750 (LWH)
 
(115V Available)


Model CS1PH3-15HP
Input voltage190-264 vac
Frequency50- to 60 hz
Output rating600 VA at 240 vac
Horse power ranges3 to 15HP
Dry run adj range10 to 75 amps
Dry run trip delay10 seconds
Restart delay range1-300 min; 0 for manual reset
Rapid cycle adj range0 to 600 seconds
Required CT ratio50 : 5
Ambient operating temp-4 to 122 degrees F
Dimensions4.524 X 3.524 X 1.750 (LWH)


Model CS3PH1-500HP
Control voltage95-132 vac (115 volt range)
190-264 vac (230 volt range)
Frequency50- to 60 hz
Output rating600 VA at 240 vac
Horse power ranges1 to 500 HP (CT's required)
Dry run adj range 0 to 7.5 amps (50:5 CT w/10 passes)
7.6 to 37.5 amps (50:5 CT w/2 passes)
38-75 amps (50:5 CT w/1 pass)
75 to 375 amps (250:5 CT w/1 pass)
376 to 750 amps (500:50 CT w/1 pass)
Dry run trip delay10 seconds
Restart delay range1 to 300 min; 0 for manual reset
Rapid cycle adj range0-600 seconds
Ambient operating temp-4 to 122 degrees F
Dimensions4.524 X 3.524 X 1.750 (LWH)




Cycle Stop Valves® is a registered trademark.
All right reserved unless prior authorization is obtained.
Cycle Stop Valves, Inc.
10221 CR 6900
Lubbock, Texas 79407
Send Email
800-652-0207
Fax: 806-885-1994